Biological aspects and feeding behavior of cotton aphid in watermelon cultivars submitted to silicon application / Aspectos biológicos e comportamento alimentar do pulgão-do-algodoeiro em cultivares de melancia submetidas à aplicação de silício

This research aimed to evaluate the biological aspects and the feeding behavior of Aphis gossypii in watermelon cultivars submitted to silicon application. The experiment was conducted at the Institute of Education, Agriculture and Environment of the Federal University of Amazonas, Humaitá, Brazil. The experimental design was completely randomized in a 2×3 factorial (with and without silicon; cultivars Crimson Sweet, Fairfax and Charleston), with ten replications. The application of silicic acid (1%) was carried out directly on the substrate using dose equivalent to 1 ton SiO2·ha-1, 25 days after sowing. The rearing of aphids was kept in cucumber plants, cultivar Caipira. Insect biology tests were conducted to evaluate the duration of the prereproductive, reproductive and postreproductive periods, longevity, number of nymphs, and feeding behavior using the honeydew secretion technique. Analysis of variance was performed using the statistical program SISVAR and the means were compared by the F and Scott­Knott test (p ≤ 0.05). The silicon application to watermelon plants affects the reproduction and feeding of A. gossypii. The watermelon plants cultivar Crimson Sweet treated with silicon has high resistance to feeding by A. gossypii.(AU)

Nesta pesquisa objetivou-se avaliar os aspectos biológicos e o comportamento alimentar de Aphis gossypii em cultivares de melancia submetidas à aplicação de silício. O experimento foi conduzido no Instituto de Educação, Agricultura e Ambiente da Universidade Federal do Amazonas, Humaitá, Brasil. Utilizaram-se o delineamento experimental inteiramente ao acaso e o esquema fatorial 2×3 (sem silício e com silício; cultivares Crimson Sweet, Fairfax e Charleston), com dez repetições. A aplicação do ácido silícico (1%) foi realizada diretamente no substrato, com dose equivalente a 1 ton SiO2·ha-1, 25 dias após a semeadura. Os pulgões da criação foram mantidos em plantas de pepino, cultivar Caipira. Foram conduzidos ensaios de biologia do inseto para avaliação da duração dos períodos pré-reprodutivo, reprodutivo e pós-reprodutivo, longevidade, número de ninfas e comportamento alimentar por meio da técnica de secreção de honeydew. Realizou-se a análise de variância dos dados utilizando-se o programa estatístico SISVAR e as médias foram comparadas pelo teste de F e Scott­Knott (p ≤ 0,05). A aplicação de silício em plantas de melancia afeta a reprodução e a alimentação de A. gossypii. Plantas de melancia do cultivar Crimson Sweet tratadas com silício apresentam alta resistência à alimentação por A. gossypii.(AU)

A simplified protocol to determine total fluoride concentration in NaF/silica-based toothpastes

Aim: To determine total fluoride (TF) concentration in Na2FPO3/Ca-based toothpastes, using fluoride ion selective electrode (F-ISE) by the direct technique, it is necessary to use acid (Ac+) to hydrolyze the FPO32- ion and to dissolve insoluble fluoride salts bound to the abrasive. For NaF/silica-based toothpastes, the use of acid is not necessary (Ac-) and a simplified protocol could be followed. Methods: Thus, we evaluated TF concentration in seven brands of NaF/silica-based toothpastes, following the validated conventional Cury's protocol (Ac+) or a simplification of this protocol (Ac-).Fluoride was analyzed with ISE calibrated with fluoride standard solutions prepared in the same conditions as the samples (Ac+ or Ac-). Results: The mean (±SD; n=21) of TF concentrations (µg F/g) found by Ac+ (971.3±191.2) and Ac- (982.4±201.3) protocols were not statistically different (t test, p=0.22). The TF concentrations found agree with those declared by the manufacturers, except for one toothpaste imported from China. Conclusion: The findings suggest that the determination of fluoride in NaF/silica-based toothpastes can be accurately made using a simplified protocol of analysis

Use of silicon for skin and hair care: an approach of chemical forms available and efficacy

Abstract Silicon is the second most abundant element on Earth, and the third most abundant trace element in human body. It is present in water, plant and animal sources. On the skin, it is suggested that silicon is important for optimal collagen synthesis and activation of hydroxylating enzymes, improving skin strength and elasticity. Regarding hair benefits, it was suggested that a higher silicon content in the hair results in a lower rate of hair loss and increased brightness. For these beneficial effects, there is growing interest in scientific studies evaluating the efficacy and safety of using dietary supplements containing silicon. Its use aims at increasing blood levels of this element and improving the skin and its annexes appearance. There are different forms of silicon supplements available and the most important consideration to be made in order to select the best option is related to safety and bioavailability. Silicon supplements are widely used, though there is wide variation in silicon bioavailability, ranging from values below 1% up to values close to 50%, depending on the chemical form. Therefore, the aim of this study was to evaluate the scientific literature related to the different chemical forms of silicon supplements available and the limitations and recent progress in this field. According to reported studies, among the different chemical forms available, the orthosilicic acid (OSA) presents the higher bioavailability, whereas the others forms have absorption inversely proportional to the degree of polymerization. However, clinical studies evaluating safety and efficacy are still lacking.

Efeito de duas técnicas de gradação da zircônia no limite de fadiga de próteses parciais fixas monolíticas de três elementos / Effect of two grading zirconia techniques on the fatigue limit of fullcontour 3-unit fixed dental prothesis

O objetivo deste estudo foi avaliar os efeitos de duas técnicas de gradação da zircônia no limite de fadiga de próteses parciais fixas (PPFs) de 03 elementos. Blocos pré-sinterizados de 3Y-TZP (zircônia policristalina parcialmente estabilizada por 3% mol de ítria) foram fresados para obter 69 PPFs, que foram divididas em 3 grupos (n = 23). O grupo controle (CTL) foi sinterizado e glazeado odedecendo os parâmetros usuais. Nos dois grupos experimentais as PPFs receberam sílica/vidro antes da sinterização. O grupo sílica sol-gel (SSG) foi graduado pela rota de processamento sol-gel, enquanto o grupo vidro-zircônia-vidro (GZG) foi graduado pela técnica de suspensão (slurry). Os grupos graduados não receberam a camada de glaze após a sinterização. Todas as PPFs foram cimentadas nos pilares de compósito com cimento resinoso de dupla polimerização, incluídas em poliuretano e armazenadas em água por cinco dias. A carga inicial do teste de fadiga foi calculada com base nos resultados do ensaio monotônico de três amostras de cada grupo. Para determinar o limite de fadiga 20 amostras de cada grupo foram submetidas ao método da escada ou staircase (100.000 ciclos/5 Hz). Os limites de fadiga (em Newton) foram: CTL = 1607,27; SSG = 1824,31; GZG = 2006,57 e o teste de Dixon e Mood indicou diferença estatística entre os grupos (intervalo de confiança de 95%). As infiltrações de sílica e vidro no corpo da zircônia, por dois diferentes métodos de gradação, aumentaram o limite de fadiga de PPFs em zircônia monolítica(AU)

The aim of this study was to evaluate the effects of two grading zirconia techniques on the fatigue limit of 3-unit fixed dental prostheses (FDPs). Presintered blocks of 3YTZP (3 mol% yttria-stabilized tetragonal zirconia polycrystal) were milled to obtain sixty-nine 3-unit FDPs, which were divided into three groups (n = 23). The control group (CTL) was sintered and glazed following the usual parameters. In the two experimental groups presintered FDPs received silica/glass before sintering. Silica sol-gel group (SSG) was graded by the sol-gel processing route, while the glasszirconia-glass group (GZG) was graded by a slurry technique. Graded groups did not receive a glaze layer after sintering. All FDPs were then luted with a dual-curing resin cement on composite abutments, embedded in polyurethane and stored in water for five days. The initial load of the fatigue test was calculated based on the results of the monotonic testing applied on three specimens of each group. To determine the fatigue limit, 20 samples of each group were subjected to staircase testing (100,000 cycles/5 Hz). The fatigue limits (in Newtons) were CT = 1607.27, SSG = 1824.31, and GZG = 2006.57, and the Dixon and Mood test indicated statistically significant differences among groups (95% confidence interval). The infiltration of silica and glass on zirconia bulk, by two different grading methods, increased the fatigue limits of monolithic zirconia FDPs(AU)

Una década de monitoreo de plomo en sangre en niños escolares del área metropolitana de Monterrey, NL / A decade of lead monitoring in schoolchildren in the metropolitan area of Monterrey NL, Mexico

Objetivo. Establecer las concentraciones de plomo (Pb) en sangre en niños escolares de 1998 y 2008, así como su asociación con factores de riesgo. Material y métodos. Se llevó a cabo un monitoreo de Pb en sangre de niños de entre 6 y 12 años que cursan educación primaria en 17 escuelas diferentes, ubicadas en distintas zonas del área metropolitana de Monterrey, de 1998 a 2008. Resultados. Se obtuvieron niveles séricos de 9.6 ± 3.0 (µg/dL rango de 3.18 a 20.88) en 1998 y de 4.5±4.8 µg/dL (rango de 3.3 a 53.7) en 2008, lo que mostró una disminución de 2.1 veces en nivel de Pb (p<0.01). Conclusiones. La reducción de los niveles séricos de Pb demuestran los mejores controles ambientales e industriales y probablemente el éxito de retirar el Pb de la gasolina durante los años noventa.

Objective. To establish the blood lead concentration and associated risk factors in schoolchildren during 1998 and 2008. Materials and methods. A blood lead screening was conducted in schoolchildren of 6-12 years of age, enrolled in 17 elementary schools of the metropolitan area of Monterrey, México, during 1998 and 2008. Results. The mean blood lead level were 9.6 ± 3.0 (µg/dL range of 3.18 to 20.88) in 1998 and 4.5±4.8 µg/dL (range of 3.3 to 53.7) showing a 2.1-times reduction in blood lead levels (p<0.01). Conclusions. This reduction in blood lead levels demonstrate environmental and industrial control improvements and the benefits of fading out the leaded gasoline during the 1990's.

Can Acid Pocket-targeting Alginate-antacid (Gaviscon Double Action) Relieve Upper Gastrointestinal Symptoms in Gastro-oesophageal Reflux Disease? / 대한소화기학회지

No abstract available.

The influence of desensitizing dentifrices on pain induced by in-office bleaching

The purpose of this study was to evaluate whether the use of desensitizing dentifrices used 15 days prior to and after in-office tooth bleaching could eliminate or reduce tooth sensitivity. After institutional review board approval and informed consent, 45 subjects were selected and divided into 3 groups according to the dentifrice selected: Colgate Total (CT), Colgate Sensitive Pro-Relief (CS) or Sensodyne ProNamel (SP). The subjects used toothpaste and a toothbrush provided to them for 15 days prior to bleaching. They were then submitted to two in-office bleaching sessions (Whiteness HP Blue Calcium). Their tooth sensitivity was assessed using the Visual Analog Scale (VAS) for a week after each session. Their tooth shade alteration was measured with a Vitapan Classical shade guide to determine if the dentifrices could influence the effectiveness of the bleaching agent. The data were submitted to Wilcoxon, Kruskal-Wallis and Mann-Whitney tests (α = 0.05). The use of desensitizing dentifrices did not affect the bleaching efficacy. In regard to tooth sensitivity, there was a statistically significant difference between the results of the Control Group and Group T2 after the first session (p = 0.048). There was no statistically significant difference in the results for the other groups after the first session. In regard to the second session, there was no statistically significant difference in the results for all the groups. The use of a desensitizing dentifrice containing nitrate potassium reduced tooth sensitivity during the bleaching regimen. Dentifrices containing arginine and calcium carbonate did not reduce tooth sensitivity. Color change was not influenced by the dentifrices used.

Chemical characteristics of mineral trioxide aggregate and its hydration reaction

Mineral trioxide aggregate (MTA) was developed in early 1990s and has been successfully used for root perforation repair, root end filling, and one-visit apexification. MTA is composed mainly of tricalcium silicate and dicalcium silicate. When MTA is hydrated, calcium silicate hydrate (CSH) and calcium hydroxide is formed. Formed calcium hydroxide interacts with the phosphate ion in body fluid and form amorphous calcium phosphate (ACP) which finally transforms into calcium deficient hydroxyapatite (CDHA). These mineral precipitate were reported to form the MTA-dentin interfacial layer which enhances the sealing ability of MTA. Clinically, the use of zinc oxide euginol (ZOE) based materials may retard the setting of MTA. Also, the use of acids or contact with excessive blood should be avoided before complete set of MTA, because these conditions could adversely affect the hydration reaction of MTA. Further studies on the chemical nature of MTA hydration reaction are needed.

In vitro study on tooth enamel lesions related to whitening dentifrice.

Background: The tooth whitening substances for extrinsic use that are available in Brazil contain hydrogen peroxide or carbamide peroxide. Several studies have attributed the appearance of lesions in the enamel morphology, including hypersensitivity, to these substances. Such lesions justify fluoride therapy and application of infrared lasers, among other procedures. However, there is no consensus among researchers regarding the relevance of the severity of lesions detected on the tooth surface. Objectives: The present study was carried out with an aim of evaluating in vitro the effects of the hydrogen peroxide, carbamide peroxide and sodium bicarbonate contained in dentifrice formulations, on human tooth enamel. Materials and Methods: After darkening process in laboratory, human premolars were brushed using dentifrice containing the two whitening substances (Rembrandt - carbamide peroxide and Mentadent - hydrogen peroxide) and the abrasive product (Colgate - sodium bicarbonate). The degree of specimen staining before and after this procedure was determined using spectrophotometry. Scanning electron microscopy (SEM) was used to obtain images, which were analyzed to show the nature of the lesions that appeared on the enamel surface. Results: The effectiveness of the whitening caused by hydrogen peroxide and carbamide peroxide and the abrasion caused by bicarbonate were confirmed, given that the treated test pieces returned to their original coloration. Based on SEM, evaluation of the enamel surfaces subjected to the test products showed that different types of morphologic lesions of varying severity appeared. Conclusions: Whitening dentifrice containing hydrogen peroxide and carbamide peroxide produced lesions on the enamel surface such that the greatest sequelae were associated with exposure to hydrogen peroxide.

Efeito do silício na intensidade da cercosporiose e na nutrição mineral de mudas de cafeeiro / Effect of silicon on the intensity of brown eye spot and on the mineral nutrition of coffee seedlings

O presente trabalho objetivou estudar o efeito do silício na intensidade da cercosporiose e na nutrição mineral de mudas de cafeeiro. No experimento 1, testou-se seis doses de ácido silícico (0, 0,5; 1; 2; 4 e 6 g kg­1 de solo) em mudas da cultivar Catuaí Vermelho IAC 99 inoculadas com o fungo Cercospora coffeicola. No experimento 2, foram realizadas microanálises de raios-X para a avaliação de nutrientes presentes nas folhas das mudas de cafeeiro das cultivares Topázio MG1190 e Icatu Precoce IAC 3282, inoculadas e não inoculadas com C. coffeicola, com e sem silicato de cálcio (1 g kg-1 de solo). Com o aumento das doses de ácido silícico observou-se redução na área abaixo da curva de progresso do número de lesões por folha (AACPNLF), redução linear nos teores foliares de magnésio e fósforo e aumento nos teores de enxofre e cobre. Os teores foliares de boro apresentaram comportamento quadrático, diminuindo com o aumento das doses de ácido silícico e aumentando a partir da dose de 4 g kg-1 de solo. Em microanálise de raio X, mudas de cafeeiro com cercosporiose apresentam menores picos de potássio e cálcio, independente da cultivar utilizada.

Our objective was to verify the effect of silicon on the intensity of brown eye spot and on the mineral nutrition of coffee seedlings. In the first experiment, 6 doses of silicic acid (0, 0.5, 1, 2, 4 and 6 g kg-1 soil) were tested using a complete randomized block design with 4 replicates with 6 coffee seedlings cultivar Catuaí Vermelho IAC 99 inoculated with the fungus Cercospora coffeicola. In the second experiment, X-ray microanalysis in a scanning electron microscope was performed on 2 coffee cultivars (Topazio MG1190 and Icatu Precoce IAC 3282), inoculated and non-inoculated with C. coffeicola, treated and untreated with calcium silicate (1 g kg-1 of soil). With the increase of the silicic acid doses, there was observed a reduction in the area under the disease progress curve of the number of lesions per leaf (AUPCNLL), coupled with a linear reduction in the foliar contents of magnesium and phosphorus as well as an increase in the contents of sulfur and copper. The foliar contents of boron presented a quadratic behavior, decreasing with the increase of silicic acid and increasing with the dose of 4 g kg-1 of soil. In X-ray microanalysis, coffee seedlings with brown eye spot presented lower peaks of potassium and calcium, regardless of the cultivar used.

Uso de silício como indutor de resistência em batata a Myzus persicae (Sulzer) (Hemiptera: Aphididae) / Use of silicon as inductor of the resistance in potato to Myzus persicae (Sulzer) (Hemiptera: Aphididae)

The aphid Myzus persicae (Sulzer) is an important pest of potato and causes direct harm, due to the quantity of sap extracted and for being vector of important phytovirus. This work was carried out to evaluate the action of silicon as a resistance inducer of potato to M. persicae. Four treatments were tried: foliar fertilization with silicon acid at 1 percent; soil fertilization with 250 ml silicic acid solution at 1 percent; foliar fertilization with silicon acid at 1 percent + soil fertilization with 250 ml silicic acid solution at 1 percent; and a control. The treatments were applied thirty days after the explants emergence. Fifteen days after the application of the treatments, feeding preference and some biological aspects of the aphids were evaluated. After, the content of tannins and lignin present in the leaves and the activity of the enzymes peroxidase and phenylalanine ammonia-lyase were also determined. The silicon fertilization did not affect the preference of the aphids; however it reduced fecundity and the rate of population growth of the insects. The lignin percentage increased in the leaves of plants fertilized with silicon via soil and/or foliar and the percentage of tannins increased only in the leaves fertilized via soil plus foliar. The silicon acted as a resistance inducer to M. persicae in potato.

O pulgão Myzus persicae (Sulzer) é uma importante praga da batateira, causando danos diretos pela quantidade de seiva extraída e por ser vetor de importantes fitovírus. Este trabalho foi realizado para verificar a atuação do silício como indutor de resistência em batata a M. persicae. Foram utilizados quatro tratamentos: adubação foliar com solução de ácido silícico a 1 por cento; adubação via solo com 250 ml de solução de ácido silícico a 1 por cento; adubação foliar com solução de ácido silício a 1 por cento + adubação via solo com 250 ml de solução de ácido silícico a 1 por cento1; e a testemunha. Os tratamentos foram aplicados trinta dias após a emergência das brotações. Após quinze dias da aplicação dos tratamentos avaliou-se a preferência e alguns aspectos biológicos do pulgão. Posteriormente foi feita a quantificação do teor de taninos e de lignina presentes nas folhas e a determinação das atividades das enzimas peroxidase e fenilalanina amônia-liase. A adubação silicatada não afetou a preferência dos pulgões, porém diminuiu a fecundidade e a taxa de crescimento populacional dos insetos. A percentagem de lignina aumentou nas folhas das plantas adubadas com silício via solo e/ou foliar e a porcentagem de taninos aumentou apenas nas folhas das plantas adubadas via solo + foliar. O silício atuou como indutor de resistência a M. persicae em batata.

A novel europium doped apatite/wollastonite porous magnetic bioactive glass ceramic / 生物医学工程学杂志

A new biocompatible apatite-wollastonite magnetic glass ceramic has been synthesized via sol-gel process. Characteristics of the materials were determined with differential thermal analysis (DTA), X-ray diffraction (XRD), scan electron microscopy (SEM), energy dispersive spectrum (EDS), inductively couple plasma atomic emission spectroscopy (ICP-AES), vibrating sample magnetometer (VSM) and so on. Results showed that the main crystalline phases of the material were hydroxyapatite/fluoroapatite [Ca10(PO4)6(OH, F)), beta-wollastonite[beta-CaSiO3] and calcium europium oxide silicate Ca2Eu8[(SiO4)6O2]. The magnetization of the sample contanining 2% Eu2O3 in weight reached 2.18 emu/g for an applied field of 10 000Oe. Hydroxyapatite layer could form on the surface of the sample while soaking for 14 days in simulated body fluid. Good bioactivity was demonstrated. So it is a potential bone repairing material as well as a hyperthemia treatment material for pateints with cancer.

Efeitos do ácido silícico e do acibenzolar-S-methyl sobre Schizaphis graminum (Rondani) (Hemiptera: Aphididae) em plantas de trigo / Effects of silicon acid and of acibenzolar-S-methyl on Schizaphis graminum (Rondani) (Hemiptera: Aphididae) in wheat plants

Neste trabalho, o objetivo foi avaliar os efeitos do ácido silícico e do acibenzolar-S-methyl (ASM) sobre a biologia e o comportamento do pulgão-verde em plantas de trigo. O experimento constituiu-se em um fatorial 4 (sem silício, silício via foliar, silício via solo e silício via solo + foliar) x 2 (com e sem acibenzolar-S-methyl), em delineamento inteiramente ao acaso. Um teste de preferência com chance de escolha foi montado em delineamento em blocos casualizados, com dez repetições. A concentração de ácido silícico foi 1 por cento e de ASM, 0,5 por cento. Para a avaliação dos tratamentos foram realizados testes de preferência com chance de escolha (contagem de pulgões adultos em secções foliares de plantas de trigo), avaliação da biologia (duração dos períodos pré-reprodutivo, reprodutivo e pós-reprodutivo, mortalidade no período pré-reprodutivo, número de ninfas produzidas, longevidade e taxa de crescimento populacional) e colonização dos pulgões (número de pulgões adultos e ninfas). No teste de preferência com chance de escolha, as plantas tratadas com ASM não foram preferidas pelos pulgões. A aplicação de silício ou ASM reduziu o número de ninfas produzidas, a taxa de crescimento populacional, o período pós-reprodutivo e a longevidade do pulgão-verde. Na colonização o número de pulgões foi reduzido pela aplicação de ASM ou silício. A aplicação de ácido silícico, principalmente via solo, ou de ASM, é promissora para uso no manejo integrado do pulgão-verde em trigo.

The objective of this work was to evaluate the effects of silicon acid and acibenzolar-S-methyl (ASM) on biology and behavior of the aphid (greenbug) in wheat plants. The experiment involved a 4 factorial (no silicon, silicon on leaf, silicon in the soil and silicon in the soil + on leaf), x 2 (with and without acibenzolar-S-methyl), in a completely randomized design. A preference test with chance of choice was set in blocks randomized, with 10 replications. Silicon acid was used at 1 percent and ASM at 0.5 percent. The treatments were evaluated by means of preference tests with chance of choice (adult aphids in leaf sections of wheat plants were counted), biological studies (length of pre-reproductive, reproductive and post-reproductive periods, mortality rate during the pre-productive period, number of nymphs, longevity and population growth rate were determined) and colonization of aphids (number of adult aphids and nymphs were determined). In the preference test, plants that received ASM were not chosen by the aphids. The application of the silicon or ASM reduced significantly the number of nymphs, the population growth rate, the post-reproductive period and the longevity of the greenbug. A significant reduction of the number of aphids was observed during aphids colonization when ASM or silicon were applied. The addition of silicon acid, mostly in the soil, or of ASM is promising as a control method in the integrated management of aphid in wheat.

Study on a new type of apatite/wollastonite porous bioactive glass-ceramic / 生物医学工程学杂志

A novel glass-ceramic has been derived from sol-gel process. In this study XRD and FTIR analysis confirmed that the main crystalline phases of the material were hydroxyapatite/fluoroapatite [Ca10(PO4)6(OH,F)] and beta-wollastonite[beta-CaSiO3]; SEM examination showed that the microstructure contained many micro pores of 2-3 microm. After pore-forming, the material possessed good macro porous structure: the size of macro pores was 300-400 microm in diameter, and pores interconnected each other. Bioactivity of the material was preliminarily evaluated in the simulate body fluid. SEM observation revealed that a lot of apatite granules had been formed on the surface of the material after soaking within 7 days. Result shows that the novel sol-gel derived apatite-wollastonite-containing glass-ceramic has good bioactivity. Porous materials have suitable microstructure as well as macrostructure, which make it an excellent material to be used as bone-repairing materials and bone tissue engineering carrier materials.

Montagem e padronizaçäo do radioimunoensaio do ACTH plasmático / Mounting and standardization of radioimmunoassay of plasmatic ACTH

Esta investigaçäo compreendeu a padronizaçäo da extraçäo e do radioimunoensaio do ACTH plasmático, ainda näo realizados no Brasil. A extraçäo foi feita com ácido silícico ativado com posterior deadsorçäo com ácido clorídrico/acetona. O RiE utilizou um anticorpo central contra a seqüência 11-24 do ACTH e o padräo de marcaçäo e das curvas padröes foi o ACTH (1-39) humano sintético. Os resultados permitiram as seguintes conclusöes: a. na extraçäo do ACTH do plasma através do ácido silícico, a maior perda ocorreu na fase de adsorçäo e pouco nas outras fases, sendo que em 22 extraçöes consecutivas a recuperaçäo final foi em média 60,7%; b. as curvas padröes extraídas foram paralelas às curvas em tampäo, e os extratos näo modificaram os blanks ou o zero, indicando ausência de interferências inespecíficas da extraçäo do RiE; c. O RiE ralizado com pré-incubaçäo de 67 horas apresentou uma sensibilidade média de 3,3 pg/tubo (7,7 pg/ml plasma). Os coeficientes de variaçäo intra-ensaio estiveram entre 6,3 e 12,3%, e o interensaio foi de 18,3%. A replicaçäo, no intervalo de 13 a 4.260 pg/ml, apresentou um coeficiente de correlaçäo de 0,99. No conjunto, concluímos que o RiE do ACTH padronizado neste trabalho é confiável, podendo ser utilizado em diagnóstico e pesquisa